| Single Point Tooling | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| HSS Tool Bit for single point facing, beveling and flange facing. Standard 3/8in x 3/8in (9.53mm x 9.53mm) For use with LCSF Bridge Slide |
52-701-01 52-701-01P |
Single point beveling Most materials less than 32RC hardness |
 |
| HSS Radius Tool Bit for J-prep | 52-711-01 | 3/32in (2.38mm) radius |  |
| 52-711-02 | 1/8in (3.18mm) radius | ||
| 52-711-03 | 3/16in (4.76mm) radius | ||
| Tool Holder for HSS Tool Bit | 60-707-00 | Heavy wall pipe beveling, all materials |
|
ابزارآلات جانبی و تجهیزات مرتبط با لوله بر و پخ زن مخصوص فک جدا مدل LCSF Low Clearance Split Frame Tooling ساخت وش آمریکا
اطلاعات گارانتی :
یک سال گارانتیضمانت نامه :
پنج سال خدمات پس از فروش| Beveling and Counterbore Tools | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| HSS Inside Bevel Tool | Short bevel tool for most materials. 30º - 1in (25mm) and 37.5º - 3/4in (19mm) maximum wall |
 |
|
| 30º x 3 1/8in (79mm) | 43-702-05 | ||
| 37.5º x 3 1/8in (79mm) | 43-703-05 | ||
| HSS Inside Bevel Tool | Long bevel tool for most materials. 30º - 1in (25mm) and 37.5º - 3/4in (19mm) maximum wall |
 |
|
| 30º x 5in (127mm) | 53-703-01 53-703-01P |
||
| 37.5º x 5in (127mm) | 53-703-00 53-703-00P |
||
| HSS Outside Bevel Tool | Outside bevel tool for most materials. 30º - 1in (25mm) and 37.5º - 3/4in (19mm) maximum wall |
 |
|
| 30º x 3 1/8in (79mm) | 43-707-05 | ||
| 30º x 5in (127mm) | 43-707-06 | ||
| 37.5º x 3 1/8in (79mm) | 43-708-05 | ||
| 37.5º x 5in (127mm) | 43-708-06 | ||
| HSS Double Bevel Tool | Double bevel tool for most materials. 3/4in (19mm) maximum wall |
 |
|
| 30º x 3 1/8in (79mm) | 43-709-05 | ||
| 30º x 5in (127mm) | 43-709-06 | ||
| 37.5º x 3 1/8in (79mm) | 43-710-05 | ||
| 37.5º x 5in (127mm) | 43-710-06 | ||
| HSS Compound Bevel Tool | Compound bevel tool for most materials. 1 1/4in (32mm) maximum wall for both tools |  |
|
| 10º x 37.5º x 4in (102mm) Inside | 43-712-01 | ||
| 10º x 37.5º x 4in (102mm) Outside | 43-712-02 | ||
| 10º x 37.5º x 5in (127mm) Inside | 53-705-00 | ||
| 10º x 30º x 5in (127mm) Inside | 53-704-00 | ||
| 4:1 Taper, Counterbore HSS Tool | 60-700-04 | 4:1 Taper, counterbore most materials Requires 60-405-UC Universal Counterbore Slide or 60-428-XX Bridge Slide |
 |
| Parting Tools | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| 3/16in x 3 7/16in (4.76mm x 87mm) HSS Parting Tool (Sever tool) | 43-711-00 43-711-00P |
Standard parting, most materials up to 1in (25.4mm) wall (low clearance) |
 |
| 3/16in x 5in (4.76mm x 127mm) HSS Parting Tool (Sever tool) | 43-711-01 43-711-01P |
Parting for most materials, up to 1in (25.4mm) wall |
 |
| 1/4in x 6in (6.35mm x 152mm) HSS Parting Tool (Sever tool) | 60-711-00 60-711-00P |
Heavy wall parting, most materials, up to 2in (50.8mm) wall |
 |
| 4.3in (110mm) Carbide Insert Holder for 3/16in (4.76mm) parting insert | 60-716-00 SUPERSEDES 43-704-00 |
Standard parting, most materials up to 1 1/2in (38.1mm) wall |
 |
| 3/16in (4.76mm) Carbide Insert | 60-717-00 SUPERSEDES 43-705-00 |
For use with 60-716-00 Insert Holder |
 |
| 4.3in (110mm) Carbide Insert Holder for 1/4in (6.35mm) parting insert | 60-714-00 SUPERSEDES 47-701-00 |
Standard parting, most materials up to 1 1/2in (38.1mm) wall |
|
| 1/4in (6.35mm) Carbide Insert( | 60-715-00 SUPERSEDES 47-702-10 |
For use with 60-714-00 Insert Holder |
|
